立即与支持人员聊天
与支持团队交流

Identity Manager 8.2 - Web Designer Web Portal User Guide

General tips and getting started Security keys (WebAuthn) Requests
Requesting products Saved for Later list Request templates Pending requests Displaying request history Resubmitting requests Canceling requests Renewing products with limit validity periods Unsubscribing products Displaying approvals Undoing approvals Request inquiries Auditing requests Escalated requests
Attestation
Attestors for attestation cases Sending attestation reminders My attestation cases Pending attestations Displaying attestation history Attestation inquiries Auditing attestations Attestation – Administration Escalation
Compliance Responsibilities
My responsibilities
Specifying keywords for requestable products My departments My application roles My devices My business roles My identities My cost centers My multi-request resources My multi requestable/unsubscribable resources My resources My software applications My locations My system entitlements My system roles My assignment resources
Delegating tasks Ownerships Auditing
Auditing departments Auditing application roles Auditing devices Auditing business roles Auditing identities Auditing cost centers Auditing multi-request resources Auditing multi requestable/unsubscribable resources Auditing resources Auditing software Auditing locations Auditing system roles Auditing system entitlements Auditing assignment resources
Governance administration
Managing departments Managing business roles Managing identities Managing cost centers Managing multi-request resources Managing multi requestable/unsubscribable resources Managing resources Managing locations System entitlements Managing system roles Managing assignment resources
Applications Calls Discovering your statistics on the home page Appendix: Attestation conditions and approval policies from attestation procedures Appendix: Page and menu descriptions
Information (Menu description) My requests (Menu description) Profile (Menu description) Help (Menu description) Request (Menu description) Attestation (Menu description)
My attestation status (page description) My actions (page description)
Pending attestations (page description)
Pending attestations – Attestation policies (page description) Pending attestations: One Identity Manager application roles (page description) Pending attestations: Departments (page description) Pending attestations: System roles (page description) Pending attestations: Locations (page description) Pending attestations: Business roles (page description) Pending attestations: PAM assets (page description) Pending attestations: PAM user accounts (page description) Pending attestations: Employees (page description) Pending attestations: Cost centers (page description) Pending attestations: User accounts (page description) Pending attestations: System entitlements (page description) Pending attestations: Resources (page description) Pending attestations: Assignment resources (page description) Pending attestation: Multi-request resources (page description) Pending attestations: Software (page description) Pending attestations: Multi requestable/unsubscribable resources (page description) Pending attestations – approvals (page description)
Attestation history (page description) Attestation inquiries (page description)
Auditing (page description) Governance administration (page description) Attestation escalation approval (page description)
Compliance (Menu description) Responsibilities (Menu description)
My responsibilities (page description)
Identities (page description) System entitlements (page description) Business roles (page description) System roles (page description) Departments (page description) Cost centers (page description) Locations (page description) Application roles (page description) Resources (page description) Assignment resources (page description) Multi-request resources (page description) Software (page description) Multi requestable/unsubscribable resources (page description) Devices (page description)
Delegating tasks (page description) Ownerships (page description) Auditing (page description)
Auditing – Departments (page description) Auditing – Application roles (page description) Auditing – Device (page description) Auditing – Business roles (page description) Auditing – Identity details (page description) Auditing – Cost center (page description) Auditing – Multi-request resources (page description) Auditing – Multi requestable/unsubscribable resources (page description) Auditing - Resources (page description) Auditing – Software (page description) Auditing – Locations (page description) Auditing – System roles (page description) Auditing - Assignment resource (page description) Auditing – Active Directory (page description) Auditing – Azure Active Directory (page description) Auditing – Custom target system group (page description) Auditing – Google Workspace (page description) Auditing – Domino (page description) Auditing – LDAP (page description) Auditing – Oracle E-Business Suite (page description) Auditing – Privileged Account Management (page description) Auditing – SAP R/3 (page description) Auditing – Unix (page description)
Governance administration (page description)
Business roles (page description) Identities (page description) Multi-request resources (page description) Multi requestable/unsubscribable resources (page description) Organization (page description) Resources (page description) System entitlements (page description) System roles (page description) Assignment resources (page description)
Calls (Menu description)

Displaying and approving entire requests of pending requests

You can see all other products of a product request that are included in this request (meaning, they were sent in the same shopping cart). You can approve pending requests together.

To display an entire request and approve all the requests contained in it.

  1. In the menu bar, click Request > My Actions.

  2. On the Pending Requests page, mark the product in the list that has the request you want to see in its entirety.

  3. In the details pane, click more > Show entire request.

  4. On the Request overview page, click Approve all.

  5. On the Pending Requests - Approvals page, perform one of the following actions:

    • To provide a reason for all request approvals, enter the reason in the Reason for approvals field.

    • To use a predefined standard reason for all request approvals, select the reason in the Standard reason.

    • To provide an individual reason for an approval decision, click Enter a reason and enter your reason.

    TIP: By giving reasons, your approvals are more transparent and support the audit trail.

    NOTE: For more detailed information about standard reasons, see the One Identity Manager IT Shop Administration Guide.

  6. (Optional) To specify the validity period for a requested product, perform the following actions:

    1. In the list, in the Valid from column, click on a value.

    2. In the Valid from dialog, specify from when the product is valid.

    3. Click Close.

    4. In the list, in the Valid until column, click on a value.

    5. In the Valid until dialog, specify until when the product is valid.

  7. Click Save.

  8. (Optional) If the product requires multi-factor authentication, you are prompted to enter a security code. It may take a few minutes before the prompt appears. Perform one of the following actions:

    • Click Login with the Starling 2FA app and follow the app instructions on your mobile phone.

    • Click Send SMS or Phone call, enter the security code, and click Next.

Related topics

Approving pending requests from newly created Active Directory groups

Identities can create Active Directory groups by requesting the New Active Directory security group or the New Active Directory distribution group product. As approver, you can make approval decisions about requests like this. If you approve the request, you must provide additional information about the group.

To approve a request to create a new Active Directory group

  1. On the My Actions page, click Pending Requests.

  2. In the menu bar, click Request > Escalation.

  3. On the IT Shop escalation page, apply a filter to limit the results to a specific requester, specific recipient or a specific request (see Displaying escalated requests).

  4. On the Pending Requests page, click the request for the new Active Directory group in the list.

    In the list, click the request for the new Active Directory group.

  5. In the details pane, click Configure the new group.

  6. In the dialog, enter additional information about the new group:

    • Name: Enter a name for the group.

    • Group scope: Select the scope that specifies the range of the group's usage within the domain or forest. The group's scope specifies where the group is allowed to issue permissions. You can select one of the following group scopes:

      • Global group: Global groups can be used to provide cross-domain authorizations. Members of a global group are only user accounts, computers, and groups belonging to the global group’s domain.

      • Local: Local groups are used when authorizations are issued within the same domain. Members of a domain local group can be user accounts, computers, or groups in any domain.

      • Universal: Universal groups can be used to provide cross-domain authorizations available. Universal group members can be user accounts and groups from all domains in one domain structure.

    • Container: Click Assign/Change and select a container for the group.

  7. Click OK.

  8. Next to the request, click (Approve).

  9. Click Next.

  10. On the Pending Requests - Approvals page, perform one of the following actions:

    • To provide a reason for all request approvals, enter the reason in the Reason for approvals field.

    • To use a predefined standard reason for all request approvals, select the reason in the Standard reason.

    • To provide an individual reason for an approval decision, click Enter a reason and enter your reason.

    TIP: By giving reasons, your approvals are more transparent and support the audit trail.

    NOTE: For more detailed information about standard reasons, see the One Identity Manager IT Shop Administration Guide.

  11. (Optional) To specify the validity period for a requested product, perform the following actions:

    1. In the list, in the Valid from column, click on a value.

    2. In the Valid from dialog, specify from when the product is valid.

    3. Click Close.

    4. In the list, in the Valid until column, click on a value.

    5. In the Valid until dialog, specify until when the product is valid.

  12. Click Save.

  13. (Optional) If the product requires multi-factor authentication, you are prompted to enter a security code. It may take a few minutes before the prompt appears. Perform one of the following actions:

    • Click Login with the Starling 2FA app and follow the app instructions on your mobile phone.

    • Click Send SMS or Phone call, enter the security code, and click Next.

Related topics

Approving new managers' pending requests

Managers can allocate new managers for their identities. To do this, they must select the new manager and a deadline in the future for changing managers (see Assigning other managers to my identities). An assignment of this type triggers a request of type New manager assignment.

If you have been selected as the new manger by the manager change, you receive an approval request from the previous manager. After you have accepted the change of manager, you automatically become the new manager on the given date.

You can cancel entitlements already assigned to the identity on the given date.

To approve an escalated assignment to a new manager

  1. In the menu bar, click Request > My Actions.

  2. On the My Actions page, click Pending Requests.

  3. On the Pending Requests page, click the New manager assignment request in the list.

  4. In the details pane, click Show the identity's entitlements.

  5. In the New manager assignment,deselect the box next to the entitlement that you want to remove or cancel on the deadline.

  6. Click Save.

  7. Next to the request, click (Approve).

  8. Click Next.

  9. On the Pending Requests - Approvals page, perform one of the following actions:

    • To provide a reason for all request approvals, enter the reason in the Reason for approvals field.

    • To use a predefined standard reason for all request approvals, select the reason in the Standard reason.

    • To provide an individual reason for an approval decision, click Enter a reason and enter your reason.

    TIP: By giving reasons, your approvals are more transparent and support the audit trail.

    NOTE: For more detailed information about standard reasons, see the One Identity Manager IT Shop Administration Guide.

  10. (Optional) To specify from when the new manager is responsible for the identity, perform the following:

    1. Click Valid from.

    2. In the Valid from field in the dialog, enter the date from which you want the new manager to take over.

    3. Click Close.

  11. Click Save.

  12. (Optional) If the product requires multi-factor authentication, you are prompted to enter a security code. It may take a few minutes before the prompt appears. Perform one of the following actions:

    • Click Login with the Starling 2FA app and follow the app instructions on your mobile phone.

    • Click Send SMS or Phone call, enter the security code, and click Next.

Related topics

Appointing other approvers for pending requests

You can give an another identity the task of approving a product request. To do this, you have the following options:

相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级