立即与支持人员聊天
与支持团队交流

Identity Manager 8.2.1 - Administration Guide for Connecting to Active Directory

Managing Active Directory environments Synchronizing an Active Directory environment
Setting up initial synchronization with an Active Directory domain Adjusting the synchronization configuration for Active Directory environments Running synchronization Tasks following synchronization Troubleshooting Ignoring data error in synchronization
Managing Active Directory user accounts and employees
Account definitions for Active Directory user accounts and Active Directory contacts Assigning employees automatically to Active Directory user accounts Supported user account types Updating employees when Active Directory user account are modified Automatic creation of departments and locations based on user account information Specifying deferred deletion for Active Directory user accounts and Active Directory contacts
Managing memberships in Active Directory groups Login information for Active Directory user accounts Mapping of Active Directory objects in One Identity Manager
Active Directory domains Active Directory container structures Active Directory user accounts Active Directory contacts Active Directory groups Active Directory computers Active Directory security IDs Active Directory printers Active Directory sites Reports about Active Directory objects
Handling of Active Directory objects in the Web Portal Basic data for managing an Active Directory environment Configuration parameters for managing an Active Directory environment Default project template for Active Directory Processing methods of Active Directory system objects Active Directory connector settings

Assigning Active Directory groups to business roles

NOTE: This function is only available if the Business Roles Module is installed.

Assign the group to business roles so that it is assigned to user accounts, contacts, and computers through this business role.

To assign a group to a business role (non role-based login)

  1. In the Manager, select the Active Directory > Groups category.

  2. Select the group in the result list.

  3. Select the Assign business roles task.

  4. In the Add assignments pane, select the role class and assign business roles.

    TIP: In the Remove assignments pane, you can remove assigned business roles.

    To remove an assignment

    • Select the business role and double-click .

  5. Save the changes.

To assign groups to a business role (non role-based login or role-based login)

  1. In the Manager, select the Business roles > <role class> category.

  2. Select the business role in the result list.

  3. Select the Assign Active Directory groups task.

  4. In the Add assignments pane, assign the groups.

    TIP: In the Remove assignments pane, you can remove the assignment of groups.

    To remove an assignment

    • Select the group and double-click .

  5. Save the changes.
Related topics

Adding Active Directory groups to system roles

NOTE: This function is only available if the System Roles Module is installed.

Use this task to add a group to system roles.

If you assign a system role to employees, all Active Directory user accounts owned by this employee inherit the group.

If you assign a system role to workdesks, all Active Directory computers associated with this workdesk inherit the group.

NOTE: Groups with Only use in IT Shop set can only be assigned to system roles that also have this option set. For more information, see the One Identity Manager System Roles Administration Guide.

To assign a group to system roles

  1. In the Manager, select the Active Directory > Groups category.

  2. Select the group in the result list.

  3. Select the Assign system roles task.

  4. In the Add assignments pane, assign system roles.

    TIP: In the Remove assignments pane, you can remove assigned system roles.

    To remove an assignment

    • Select the system role and double-click .

  5. Save the changes.
Related topics

Adding Active Directory groups to the IT Shop

When you assign a group to an IT Shop shelf, it can be requested by the shop customers. To ensure it can be requested, further prerequisites need to be guaranteed:

  • The group must be labeled with the IT Shop option.

  • The group must be assigned a service item.

    TIP: In the Web Portal, all products that can be requested are grouped together by service category. To make the group easier to find in the Web Portal, assign a service category to the service item.

  • If you only want the group to be assigned to employees through IT Shop requests, the group must also be labeled with the Use only in IT Shop option. Direct assignment to hierarchical roles or user accounts is no longer permitted.

NOTE: With role-based login, the IT Shop administrators can assign groups to IT Shop shelves. Target system administrators are not authorized to add groups to IT Shop.

To add a group to the IT Shop.

  1. In the Manager, select the Active Directory > Groups (non role-based login) category.

    - OR -

    In the Manager, select the Entitlements > Active Directory groups (role-based login) category.

  2. In the result list, select the group.

  3. Select the Add to IT Shop task.

  4. Select the IT Shop structures tab.

  5. In the Add assignments pane, assign the group to the IT Shop shelves.

  6. Save the changes.

To remove a group from individual shelves of the IT Shop

  1. In the Manager, select the Active Directory > Groups (non role-based login) category.

    - OR -

    In the Manager, select the Entitlements > Active Directory groups (role-based login) category.

  2. In the result list, select the group.

  3. Select the Add to IT Shop task.

  4. Select the IT Shop structures tab.

  5. In the Remove assignments pane, remove the group from the IT Shop shelves.

  6. Save the changes.

To remove a group from all shelves of the IT Shop

  1. In the Manager, select the Active Directory > Groups (non role-based login) category.

    - OR -

    In the Manager, select the Entitlements > Active Directory groups (role-based login) category.

  2. In the result list, select the group.

  3. Select the Remove from all shelves (IT Shop) task.

  4. Confirm the security prompt with Yes.
  5. Click OK.

    The group is removed from all shelves by the One Identity Manager Service. All requests and assignment requests with this group are canceled.

For more information about requesting company resources through the IT Shop, see the One Identity Manager IT Shop Administration Guide.

Related topics

Adding Active Directory groups automatically to the IT Shop

To add groups automatically to the IT Shop

  1. In the Designer, set the QER | ITShop | AutoPublish | ADSGroup configuration parameter.

  2. In the Designer, set the QER | ITShop | AutoPublish | ADSGroup | ExcludeList configuration parameter and specify the Active Directory groups that are not to be added automatically to the IT Shop.

    Example:

    .*Administrator.*|Exchange.*|.*Admins|.*Operators|IIS_IUSRS

  3. (Optional) In the Designer, set the QER | ITShop | AutoPublish | ADSGroup | AutoFillDisplayName configuration parameter.

    If the configuration parameter is set, a display name is be created for Active Directory groups if no display name exists yet. The display name of necessary to display the group in the Web Portal, for example.

  4. Compile the database.

The system entitlements are added automatically to the IT Shop from now on.

The following steps are run to add a group to the IT Shop.

  1. A service item is determined for the system entitlement.

    The service item is tested for each system entitlement and modified if required. The name of the service item corresponds to the name of the system entitlement.

    • The service item is modified if the system entitlement has a service item.

    • System entitlements without a service item are allocated a new service item.

  2. The service item is assigned to one of the default service categories.

  3. An application role for product owners is determined and the service item is assigned.

    Product owners can approve requests for membership in these system entitlements. By default, the account manager of a system entitlement is determined as the product owner.

    NOTE: The application role for the product owner must be added under the Request & Fulfillment | IT Shop | Product owner application role.
    • If the account manager of the system entitlement is already a member of an application role for product owners, this application role is assigned to the service item. Therefore, all members of this application role become product owners of the system entitlement.

    • If the account manager of the system entitlement is not yet a member of an application role for product owners, a new application role is created. The name of the application role corresponds to the name of the account manager.

      • If the account manager is a user account or a contact, the user account's employee or the contact's employee is added to the application role.

      • If it is a group of account managers, the employees of all this group's user accounts are added to the application role.

    • If the system entitlement does not have an account manager, the Request & Fulfillment | IT Shop | Product owner | Without owner in AD default application role is used.

  4. The system entitlement is labeled with the IT Shop option and assigned to the Active Directory groups IT Shop shelf in the Identity & Access Lifecycle shop.

Subsequently, the shop's customers can request memberships in system entitlement through the Web Portal.

NOTE: When a system entitlement is irrevocably deleted from the One Identity Manager database, the associated service item is also deleted.

Related topics
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级