立即与支持人员聊天
与支持团队交流

One Identity Safeguard for Privileged Passwords 7.0.2 LTS - Administration Guide

Introduction System requirements and versions Using API and PowerShell tools Using the virtual appliance and web management console Cloud deployment considerations Setting up Safeguard for Privileged Passwords for the first time Using the web client Home Privileged access requests Appliance Management
Appliance Backup and Retention Certificates Cluster Enable or Disable Services External Integration Real-Time Reports Safeguard Access Appliance Management Settings
Asset Management
Account Automation Accounts Assets Partitions Discovery Profiles Tags Registered Connectors Custom platforms
Security Policy Management
Access Request Activity Account Groups Application to Application Cloud Assistant Asset Groups Entitlements Linked Accounts User Groups Security Policy Settings
User Management Reports Disaster recovery and clusters Administrator permissions Preparing systems for management Troubleshooting Frequently asked questions Appendix A: Safeguard ports Appendix B: SPP and SPS join guidance Appendix C: Regular Expressions About us

Cannot play session message

If you receive a message that says Cannot play session... The specified executable is not a valid application for this OS platform, you are most likely attempting to run the Desktop Player on a 32-bit platform, which is not supported.

Domain user denied access to Safeguard for Privileged Passwords

If you add a directory user who has the User must change password at next logon option enabled in Active Directory, Safeguard for Privileged Passwords prevents that user from logging in. There are two ways to allow the directory user to log in to Safeguard for Privileged Passwords successfully:

  • Have the directory user use their domain account to log in to an asset joined to Active Directory. When prompted they can change their password. This fulfills the User must change password at next logon requirement.

    -OR-

  • Have the domain administrator disable the option in Active Directory for the directory user.

LCD status messages

The Safeguard for Privileged Passwords Appliance has an LCD screen that displays the status of the appliance as it is starting and as it progress through certain operations.

As it proceeds through its various stages, it displays the following LCD status messages. First boot setup refers to the initial configuration of Safeguard for Privileged Passwords, which normally happens at the factory when the appliance is deployed and after a factory reset.

  • Apply Update xx%: Shows the percentage completed as the appliance progresses through an update operation.
  • Factory Reset xx%: Shows the percentage completed as the appliance progresses through a factory reset.
  • First boot ... <version>: Displays after the first boot completes while it is waiting for Safeguard for Privileged Passwords to load.
  • First Boot Setup xx%: Shows the percentage completed as the appliance is being configured for the first time.
  • Preparing for first boot setup: Displays after a factory reset and before the appliance starts configured for the first time.
  • Quarantine: Indicates the appliance in a Quarantine state. For more information, see What do I do when an appliance goes into quarantine.
  • Starting core: Indicates that Safeguard for Privileged Passwords is being loaded.
  • Starting database: Indicates that the Safeguard for Privileged Passwords database is being loaded.
  • Starting reboot: Indicates the appliance is being rebooted.
  • Starting services: Indicates that Safeguard for Privileged Passwords services are being loaded.
  • Starting shut down: Indicates the appliance is being shut down.
  • Starting web: Indicates that the web services are being loaded.

When the appliance is running, the LCD home screen displays: Safeguard for Privileged Passwords <version number>.

Appliance LCD and controls

The front panel of the Safeguard for Privileged Passwords 4000 Appliance, 3000 Appliance and 2000 Appliance contain the following controls for powering on, powering off, and scrolling through the LCD display.

  • Green check mark button: Use the Green check mark button to start the appliance. Press the Green check mark button for NO more than one second to power on the appliance.

    Caution: Once the Safeguard for Privileged Passwords Appliance is booted, DO NOT press and hold the Green check mark button. Holding this button for four or more seconds will cold reset the power of the appliance and may result in damage.
  • Red X button: Use the Red X button to shut down the appliance. Press and hold the Red X button for four seconds until the LCD displays POWER OFF.

    Caution: Once the Safeguard for Privileged Passwords Appliance is booted, DO NOT press and hold the Red X button for more than 13 seconds. This will hard power off the appliance and may result in damage.
  • Down, up, left, and right arrow buttons: When the appliance is running, the LCD home screen displays: Safeguard for Privileged Passwords <version number>. Use the arrow buttons to scroll through the following details:
    • Serial: <appliance serial number>
    • X0: <appliance IP address>
    • MGMT: <management IP address>
    • MGMT MAC: <media access control address>
    • IPMI: <IP address for IPMI>
Table 214: Appliance LCD and controls
Control Description

Green check mark button

Use the Green check mark button to start the appliance. Press the Green check mark button for NO MORE THAN one second to power on the appliance.

Caution: Once the Safeguard for Privileged Passwords Appliance is booted, DO NOT press and hold the Green check mark button. Holding this button for four or more seconds will cold reset the power of the appliance and may result in damage.

Red X button

Use the Red X button to shut down the appliance. Press and hold the Red X button for four seconds until the LCD displays POWER OFF.

Caution: Once the Safeguard for Privileged Passwords Appliance is booted, DO NOT press and hold the Red X button for more than 13 seconds. This will hard power off the appliance and may result in damage.
Down, up, left, and right arrow buttons

When the appliance is running, the LCD home screen displays:

  • Safeguard for Privileged Passwords <version number>

Use the arrow buttons to scroll through the following details:

  • Serial: <appliance serial number>
  • X0: <appliance IP address>
  • MGMT: <management IP address>
  • MGMT MAC: <media access control address>
  • IPMI: <IP address for IPMI>
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级