立即与支持人员聊天
与支持团队交流

Identity Manager 9.2 - Administration Guide for Connecting to HCL Domino

Managing HCL Domino environments Synchronizing a Domino environment
Setting up initial synchronization of a Domino environment Domino server configuration Setting up a gateway server Creating a synchronization project for initial synchronization of a Notes domain Adjusting the synchronization configuration for Domino environments Running synchronization Tasks following synchronization Troubleshooting Ignoring data error in synchronization Pausing handling of target system specific processes (Offline mode)
Managing Notes user accounts and identities Managing memberships in Notes groups Login credentials for Notes user accounts Using AdminP requests for handling Domino processes Mapping Notes objects in One Identity Manager
Notes domains Notes user accounts Notes groups Notes certificates Notes templates Notes policies Notes mail-in databases Notes server Reports about Notes objects
Handling of Notes objects in the Web Portal Basic data for managing a Domino environment Configuration parameters for managing a Domino environment Default project template for Domino Processing methods of Domino system objects Domino connector settings

Allow routing through servers

The given user accounts, groups, and servers use the server as passthru servers without taking server access into account. If there are no user accounts, groups, or servers assigned, the server cannot be used as a passthru server.

Servers must be set up as passthru destinations for assignments to take effect. For more information, see Setting up Notes servers as passthru servers for routing.

To allow user accounts to use the server as passthru server

  1. In the Manager, select the HCL Domino > Notes servers category.

  2. Select the server in the result list.

  3. Select the Route through Server task.

  4. In the Table field, select the Notes user accounts table.

  5. In the Add assignments pane, assign the user accounts.

    TIP: In the Remove assignments pane, you can remove assigned user accounts.

    To remove an assignment

    • Select the user account and double-click .

  6. Save the changes.

To allow groups to use the server as passthru server

  1. In the Manager, select the HCL Domino > Notes servers category.

  2. Select the server in the result list.

  3. Select the Route through Server task.

  4. In the Table field, select the Notes groups table.

  5. In the Add assignments pane, assign groups.

    TIP: In the Remove assignments pane, you can remove the assignment of groups.

    To remove an assignment

    • Select the group and double-click .

  6. Save the changes.

To allow servers to use the server as passthru server

  1. In the Manager, select the HCL Domino > Notes servers category.

  2. Select the server in the result list.

  3. Select the Route through Server task.

  4. In the Table field, select the Notes server table.

  5. In the Add assignments pane, assign the servers.

    TIP: In the Remove assignments pane, you can remove assigned servers.

    To remove an assignment

    • Select the server and double-click .

  6. Save the changes.
Related topics

Setting up Notes servers as passthru servers for routing

The given user accounts, groups, and servers can access the server using passthru servers. Server access must also be set up on this server for user accounts, groups, and servers. For more information, see Allow server access.

If there are no user accounts, groups, or servers assigned, the server cannot be used as a passthru destination.

To allow user accounts to use the server as passthru destination

  1. In the Manager, select the HCL Domino > Notes servers category.

  2. Select the server in the result list.

  3. Select the Access this server task.

  4. In the Table field, select the Notes user accounts table.

  5. In the Add assignments pane, assign the user accounts.

    TIP: In the Remove assignments pane, you can remove assigned user accounts.

    To remove an assignment

    • Select the user account and double-click .

  6. Save the changes.

To allow groups to use the server as passthru destination

  1. In the Manager, select the HCL Domino > Notes servers category.

  2. Select the server in the result list.

  3. Select the Access this server task.

  4. In the Table field, select the Notes groups table.

  5. In the Add assignments pane, assign groups.

    TIP: In the Remove assignments pane, you can remove the assignment of groups.

    To remove an assignment

    • Select the group and double-click .

  6. Save the changes.

To allow servers to use the server as passthru destination

  1. In the Manager, select the HCL Domino > Notes servers category.

  2. Select the server in the result list.

  3. Select the Access this server task.

  4. In the Table field, select the Notes server table.

  5. In the Add assignments pane, assign the servers.

    TIP: In the Remove assignments pane, you can remove assigned servers.

    To remove an assignment

    • Select the server and double-click .

  6. Save the changes.
Related topics

Cause calling with the passthru server

The given user accounts, groups, and servers can access other servers by using this passthru server as a modem. If no user accounts, groups, and servers are assigned, dial up is not permitted.

Servers must be set up as passthru destinations for assignments to take effect. For more information, see Setting up Notes servers as passthru servers for routing. Furthermore, the user accounts, groups, or servers these servers can use must be defined. For more information, see Allow routing through servers.

To allow user accounts to use the passthru server for placing calls

  1. In the Manager, select the HCL Domino > Notes servers category.

  2. Select the server in the result list.

  3. Select the Cause calling task.

  4. In the Table field, select the Notes user accounts table.

  5. In the Add assignments pane, assign the user accounts.

    TIP: In the Remove assignments pane, you can remove assigned user accounts.

    To remove an assignment

    • Select the user account and double-click .

  6. Save the changes.

To allow groups to use the passthru server for placing calls

  1. In the Manager, select the HCL Domino > Notes servers category.

  2. Select the server in the result list.

  3. Select the Cause calling task.

  4. In the Table field, select the Notes groups table.

  5. In the Add assignments pane, assign groups.

    TIP: In the Remove assignments pane, you can remove the assignment of groups.

    To remove an assignment

    • Select the group and double-click .

  6. Save the changes.

To allow servers to use the passthru server for placing calls

  1. In the Manager, select the HCL Domino > Notes servers category.

  2. Select the server in the result list.

  3. Select the Cause calling task.

  4. In the Table field, select the Notes server table.

  5. In the Add assignments pane, assign the servers.

    TIP: In the Remove assignments pane, you can remove assigned servers.

    To remove an assignment

    • Select the server and double-click .

  6. Save the changes.
Related topics

Destinations permitted for passthru servers

The passthru server allows you to enter the destination servers that can be reached through this passthru server. If no destination server is given, all servers given as passthru destinations can be accessed.

Servers must be set up as passthru destinations for assignments to take effect. For more information, see Setting up Notes servers as passthru servers for routing. Furthermore, the user accounts, groups, or servers these servers can use must be defined. For more information, see Allow routing through servers.

To specify the destination server for a passthru server

  1. In the Manager, select the HCL Domino > Notes servers category.

  2. Select the server in the result list.

  3. Select Destinations allowed.

  4. In the Table field, select the Notes server table.

  5. In the Add assignments pane, assign the target servers.

    TIP: In the Remove assignments pane, you can remove assigned servers.

    To remove an assignment

    • Select the server and double-click .

  6. Save the changes.
Related topics
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级