When the validity period is calculated, the following configuration parameters are taken into account. These configuration parameters are disabled by default.
-
TargetSystem | SAPR3 | ValidDateHandling | DoNotUsePWODate
Specifies whether the request's validity period is transferred when role assignments are requested.
Not set: The request's validity period is transferred. If there is no validity period given, the default values of 1900-01-01 and 9999-12-31 are set.
Set: The role assignment is unlimited.
-
TargetSystem | SAPR3 | ValidDateHandling | ReuseInheritedDate
Controls reuse of existing profile assignments if another assignment for the same combination of user account and SAP role is added.
Set: Existing role assignments are reused if the same assignment is created by different means of inheritance. The following applies:
-
The Valid from date of the existing assignment is in the past.
-
The Valid until date of the existing assignment is 9999-12-31 or the new assignment has the same Valid until date as the existing assignment.
Any other unlimited assignment or any other assignment with the same Valid until date does not generate a new entry in the SAPUserInSAPRole table. This can reduce the number of entries in the SAPUserInSAPRole table.
Not set: An entry in the SAPUserInSAPRole table is created for every new role assignment. Existing assignments are not reused.
NOTE: In databases that are migrated from versions older than 7.0, you may see assignments with a Valid until date of 9998-12-31. This is a valid date for unlimited role assignments, which means that these assignments can also be reused.
-
TargetSystem | SAPR3 | ValidDateHandling | ReuseInheritedDate | UseTodayForInheritedValidFrom
Specifies the value that indirect role assignments' Valid from date contain when they are added.
Not set: 1900-01-01
Set: <today>
IMPORTANT: Calculating indirect role assignments can become much slower depending on the amount of data to be processed.
Do not set this configuration parameter if the information about when a role assignment's validity period starts is not absolutely necessary in SAP R/3.
To reuse an existing role assignment:
- In the Designer, set the TargetSystem | SAPR3 | ValidDateHandling | ReuseInheritedDate configuration parameter.
To set the assignment's date as the first day of the role assignment's validity period
To prevent the request's validity date being copied to the role assignment
-
In the Designer, set the TargetSystem | SAPR3 | ValidDateHandling | DoNotUsePWODate configuration parameter.
This adds an unlimited role assignment.
Related topics
SAP roles that are assigned to departments, cost centers, locations, or business roles are indirectly assigned through them to user accounts. By default, indirect assignments are unlimited. The TargetSystem | SAPR3 | ValidDateHandling configuration parameter is used to determine the validity period of indirect assignments.
You can enter a valid from date if the requests are made in the IT Shop. An entry in SAPUserInSAPRole only exist between the first and last days of the request's validity period. The request's validity period is copied to role assignments under the following prerequisites:
By default, an entry in the SAPUserInSAPRole table is created for every new role assignment. If the same assignment is created by different means of inheritance, the number of entries in the SAPUserInSAPRole table grows rapidly. In this case, if the validity period is identical, the same entries can be reused. Existing role assignments can be reused under the following prerequisites:
-
The Valid from date of the existing assignment is in the past.
-
The Valid until date of the existing assignment is 9999-12-31 or the new assignment has the same Valid until date as the existing assignment.
Any other unlimited assignment or any other assignment with the same Valid until date does not generate a new entry in the SAPUserInSAPRole table. The number of entries in the SAPUserInSAPRole table can be reduced in this way.
NOTE: In databases that are migrated from versions older than 7.0, you may see assignments with a Valid until date of 9998-12-31. This is a valid date for unlimited role assignments, which means that these assignments can also be reused.
By default, the first day that indirect assignments are valid is 1900-01-01. This does not tell us when the assignments were created. If you need this information, in the Valid from field, you can enter the date on which the SAP role will be assigned. The date of the assignment is set as the first valid day of the indirect role assignments under the following prerequisites:
IMPORTANT: Calculating indirect role assignments can become much slower depending on the amount of data to be processed.
Do not set the UseTodayForInheritedValidFrom configuration parameter if the information about the valid from date of the role assignment is not absolutely necessary in SAP R/3!
Detailed information about this topic
Related topics
| Installed modules: |
System Roles Module |
You can define One Identity Manager products as a collection of different groups, roles, or profiles in SAP. SAP products are system roles with the system role type "SAP product". Identities can obtain SAP products directly, inherit them though hierarchical role, or request them in the IT Shop.
The identity’s user account is assigned the groups, roles, and profiles in the SAP product independent of the assignment method. If an SAP product changes by adding or removing a group, role, or a profile in One Identity Manager, user account memberships are changed accordingly.
To edit SAP products
- Select the SAP R/3 > Products category.
- Select an SAP product in the result list.
– OR –
Click 
in the result list.
This opens the main data form for a system role.
- Edit the system role's main data.
- Save the changes.
For more information about system roles, see the One Identity Manager System Roles Administration Guide.
Table 66: Configuration parameters for risk assessment of SAP user accounts
| QER | CalculateRiskIndex |
Preprocessor relevant configuration parameter controlling system components for calculating the risk index. Changes to the parameter require recompiling the database.
If the parameter is enabled, values for the risk index can be entered and calculated. |
Enter the following data for a system role.
Table 67: System role main data
|
Display name |
Name for displaying the system roles in One Identity Manager tools. |
|
System role |
Unique identifier for the system role. |
|
Internal product name |
An additional internal name for the system role. |
|
System role type |
Specifies the type of company resources, which comprise the system role. |
|
Service item |
In order to use a service item within the IT Shop, assign a service item to it or add a new service item. For more information about service items, see the One Identity Manager IT Shop Administration Guide. |
|
System role manager |
Manager responsible for the system role. Assign any identity. This identity can edit system role main data. They can be used as attestors for system role properties.
If the system role can be requested in the IT Shop, the manager will automatically be a member of the application role for product owners assigned the service item. |
|
Share date |
Specify a date for enabling the system role. If the date is in the future, the system role is considered to be disabled. If the date is reached, the system role is enabled. Identities inherit company resources that are assigned to the system role.
If the share date is exceeded or no date is entered, the system role is handled as an enabled system role. Company resource inheritance can be controlled with the Disabled option in these cases.
NOTE: Configure and enable the Share system roles schedule in the Designer to check the share date. For more information about schedules, see the One Identity Manager Operational Guide. |
|
Risk index (calculated) |
Maximum risk index values for all company resources. The property is only visible if the QER | CalculateRiskIndex configuration parameter is enabled. For more information about calculating the risk index, see the One Identity Manager Risk Assessment Administration Guide. |
|
Comment |
Text field for additional explanation. |
|
Remarks |
Text field for additional explanation. |
|
Description |
Text field for additional explanation. |
|
Deactivated |
Specifies whether identities and workdesks inherit the company resources contained in the system role.
If this option is set, the system role can be assigned to identities, workdesks, hierarchical roles, and IT Shop shelves. However they cannot inherit the company resources contained in the system role. The system role cannot be requested in the Web Portal.
If this option is not set, company resources assigned to the system role are inherited. If the option is enabled at a later date, existing assignments are removed. |
|
IT Shop |
Specifies whether the system role can be requested through the IT Shop. The system role can be requested through the Web Portal and allocated by defined approval processes. The system role can still be assigned directly to identities and hierarchical roles. For more information about IT Shop, see the One Identity Manager IT Shop Administration Guide. |
|
Only for use in IT Shop |
Specifies whether the system role can only be requested through the IT Shop. The system role can be requested through the Web Portal and allocated by defined approval processes. The system role may not be assigned directly to hierarchical roles. |
|
Spare field no. 01 ... Spare field no. 10 |
Additional company-specific information. Use the Designer to customize display names, formats, and templates for the input fields. |
For more information about system roles, see the One Identity Manager System Roles Administration Guide.
