立即与支持人员聊天
与支持团队交流

One Identity Safeguard for Privileged Passwords 7.5.1 - Administration Guide

Introduction System requirements and versions Using API and PowerShell tools Using the virtual appliance and web management console Cloud deployment considerations Setting up Safeguard for Privileged Passwords for the first time Using the web client Home page Privileged access requests Appliance Management
Appliance Backup and Retention Certificates Cluster Global Services External Integration Real-Time Reports Safeguard Access Appliance Management Settings
Asset Management
Account Automation Accounts Assets Partitions Discovery Profiles Tags Registered Connectors Custom platforms Importing objects
Security Policy Management
Access Request Activity Account Groups Application to Application Cloud Assistant Asset Groups Entitlements Linked Accounts User Groups Security Policy Settings
User Management Reports Disaster recovery and clusters Administrator permissions Preparing systems for management Troubleshooting Frequently asked questions Appendix A: Safeguard ports Appendix B: SPP and SPS join guidance Appendix C: Regular Expressions

Preparing WinRM systems

Safeguard for Privileged Passwords supports asset discovery of the HyperV virtual machines for the Windows RM platform.

To prepare Windows Remote Management (WinRM) systems for Safeguard for Privileged Passwords

  1. The initial configuration requirements for WinRM depend on whether or not you are using SSL.

    • For SSL (this is when USE SSL Encryption and Verify SSL Certificate are enabled for the asset):

      1. You need to manually add a CA signed certificate to the asset:

        IMPORTANT: You will need to upload the CA certificate to Safeguard.

        On the asset, the certificate should be installed in the LocalMachine\My store and the CA should be in the LocalMachine\TrustedRoots store. If you use an intermediate that should be in the LocalMachine\Intermediate store.

        Ensure the following requirements are met for the certificate:

        • CN must match the hostname of the asset.

        • CRL must be present and resolvable.

        • Server Authentication enhanced key usage is required.

        1. The HTTPS listener needs to be registered in WinRM using the following command: winrm create winrm/config/Listener?Address=*+transport=HTTPS '@{Hostname="<hostname>";CertificateThumbprint="<thumbprint>"}'

        2. Use the following command to set the certificate: winrm set winrm/config/service '@{CertificateThumbprint="<TUMBPRINT"}'

        3. Open port 5986 in the firewall.

        4. Restart the Windows Remoting service.

    • For non-SSL:

      1. On the asset, run the following command: Enable-PSRemoting -Force.

  2. Create a service account on the asset and assign it a password:

    • Directory Configuration

      If the Windows system is joined to a domain that will be managed in Safeguard for Privileged Passwords, you can use a directory account, such as a Microsoft Active Directory account to manage the asset. Enable the Password Never Expires option; once you add the asset to Safeguard for Privileged Passwords, you can have the service account password auto-managed to keep it secure.

      -OR-

    • Local Configuration

      If the Windows system is not joined to a domain, then use a local service account that has been granted sufficient permissions.

  3. Grant the service account sufficient permissions to change account permissions to allow changing account passwords. For more information, see Minimum required permissions for Windows assets..

Preparing Windows SSH systems

Safeguard for Privileged Passwords supports asset discovery of the HyperV virtual machines for the Windows SSH platform.

Safeguard for Privileged Passwords requires that C:\Windows\System32\cmd.exe be configured as the default shell for SSH (for more information, see OpenSSH Server configuration for Windows Server and Windows).

OpenSSH on Windows 8

The OpenSSH port on Windows 8 has server-side limitations on command execution. Password operations may appear to run more slowly because commands do not return until the timeout expires, even if the command has already completed on the server. You may need to tune the Connection Timeout (CommandTimeout) when running TestConnection, ChangePassword, and CheckPassword in order to allow these password operations enough time to run while still allowing enough time to avoid timeouts for other conditions specific to your network.

To prepare Windows SSH systems for Safeguard for Privileged Passwords

  1. Ensure the SSH server service is running.

  2. Create a service account on the asset and assign it a password:

    • Directory Configuration

      If the Windows SSH system is joined to a domain that will be managed in Safeguard for Privileged Passwords, you can use a directory account, such as a Microsoft Active Directory account to manage the asset. Enable the Password Never Expires option; once you add the asset to Safeguard for Privileged Passwords, you can have the service account password auto-managed to keep it secure.

      -OR-

    • Local Configuration

      If the Windows SSH system is not joined to a domain, then use a local service account that has been granted sufficient permissions.

      IMPORTANT: A local account does not have the access necessary to discover services running as domain accounts, so if a local account is used, Safeguard for Privileged Passwords will only discover and update services running as local accounts, and domain account dependencies will not be updated.

  3. Ensure the service account is added to the local Administrator's group to allow change password permissions. For more information, see Minimum required permissions for Windows assets..

VMware vCenter Server

Safeguard for Privileged Passwords manages single sign-on (SSO) accounts on the vCenter Server platform.

To manage single sign-on accounts on the VMware vCenter Server platform

  1. Enable SSH access to the vCenter appliance.

  2. Use the SSO administrator account as the service account when creating the asset in Safeguard.

    NOTE: If the administrator account is managed by Safeguard, then Safeguard will also attempt to synchronize

    the local root account with the SSO administrator account.

  3. When creating the managed account in Safeguard, you must use the fully qualified name of the SSO account. The default fully qualified name is <account>@vsphere.local.

Safeguard for Privileged Passwords supports asset discovery for the vCenter Server platform.

To discover the virtual machines in Vsphere, ensure that the service account has HTTPS access to the vCenter Server.

Minimum required permissions for Windows assets

The following minimum permissions are required for Windows assets to perform directory password management and sessions management tasks using Windows Management Instrumentation (WMI).

NOTE: Microsoft has started hardening DCOM servers which may change your configuration decisions. For more information, see https://msrc.microsoft.com/update-guide/en-US/vulnerability/CVE-2021-26414 and https://support.microsoft.com/en-us/topic/kb5004442-manage-changes-for-windows-dcom-server-security-feature-bypass-cve-2021-26414-f1400b52-c141-43d2-941e-37ed901c769c.

Asset password management

Using a local account or domain account:

  • (Only applies to Windows Desktop and Windows Server) Test connection, Check connection, Password check, and Account discovery tasks require the following permissions:
    • Remote Enable permission on WMI's CIMV2 Namespace
    • Enable Account permission on WMI's CIMV2 Namespace

    • Remote Activation permission on computer via DCOM.

      To set Remote Enable and Enable Account permissions

      1. Open wmimgmt.msc.
      2. Right-click WMI Control (Local) and select Properties.
      3. Select the Security tab.
      4. Expand the Root node.
      5. Select the CIMV2 node.
      6. Click the Security button.
      7. Add user/group and select Remote Enable and Enable Account.
      8. Click OK.

      To set Remote Activation permissions

      1. Open dcomcnfg.
      2. Expand Component Services > Computers.
      3. Right-click My Computer and select Properties.
      4. Open the COM Security tab.
      5. Under Launch and Activation Permissions, select Edit Limits.
      6. Add user/group and select Allow for Remote Activation.
      7. Click OK.
  • Password change task requires the following permission:
    • Member of Local Administrators group
Domain password management

Using a Domain account:

  • Test connection, Check connection, Password check, and Account discovery tasks require the following permissions:
    • Member of Domain Users
  • Password change task requires that the Service account has the following delegated permissions:
    • LockoutTime (Read/Write)

    • Account Restrictions (Read/Write)

    • Reset Password

Asset session access

Using a local account:

  • Member of Remote Desktop Users group
  • Defined in the "Allow log on through Remote Desktop Services" policy (directly or via group membership)
  • Not defined in the "Deny log on through Remote Desktop Services" policy (directly or via group membership)

Using a Domain account:

  • Defined in the Remote Desktop Users group or be a member of a domain security group by a group policy update to the Remote Desktop Users group for that asset
  • Defined in the "Allow log on through Remote Desktop Services" policy (directly or via group membership)
  • Not defined in the "Deny log on through Remote Desktop Services" policy (directly or via group membership)
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级