立即与支持人员聊天
与支持团队交流

Identity Manager 9.2.1 - Administration Guide for Connecting to SAP R/3

Managing SAP R/3 environments Setting up SAP R/3 synchronization Basic data for managing an SAP R/3 environment Basic data for user account administration SAP systems SAP clients SAP user accounts SAP groups, SAP roles, and SAP profiles SAP products Providing system measurement data Reports about SAP objects Removing a Central User Administration Troubleshooting an SAP R/3 connection Configuration parameters for managing an SAP R/3 environment Default project templates for synchronizing an SAP R/3 environment Referenced SAP R/3 table and BAPI calls Example of a schema extension file

Setting up account definitions

One Identity Manager has account definitions for automatically allocating user accounts to identities. You can create account definitions for every target system. If an identity does not yet have a user account in a target system, a new user account is created. This is done by assigning account definitions to an identity.

The data for the user accounts in the respective target system comes from the basic identity main data. The identities must have a central user account. The identities must have a central an SAP user account. The assignment of the IT operating data to the identity’s user account is controlled through the primary assignment of the identity to a location, a department, a cost center, or a business role. Processing is done through templates. There are predefined templates for determining the data required for user accounts included in the default installation. You can customize templates as required.

For more information about account definitions, see the One Identity Manager Target System Base Module Administration Guide.

The following steps are required to implement an account definition:

In SAP R/3, if user accounts are managed through the central user administration (CUAClosed), you can use account definitions to grant user accounts access to the child systems and the central system. For more information, see Central user administration in One Identity Manager.

Creating an account definition

To create or edit an account definition

  1. In the Manager, select the SAP R/3 > Basic configuration data > Account definitions > Account definitions category.

  2. Select an account definition in the result list. Select the Change main data task.

    -OR-

    Click in the result list.

  3. Enter the account definition's main data.
  4. Save the changes.
Detailed information about this topic

Main data for an account definition

Enter the following data for an account definition:

Table 22: Main data for an account definition

Property

Description

Account definition

Account definition name.

User account table

Table in the One Identity Manager schema that maps user accounts.

For an account definition to create user accounts, select SAPUser.

To guarantee access to the clients of central user administration (CUAClosed) system, select SAPUserMandant.

Target system

Target system to which the account definition applies.

Required account definition

Specifies the required account definition. Define the dependencies between account definitions. When this account definition is requested or assigned, the required account definition is assigned automatically.

If you want the account definition to provide access to clients of the CUA system, assign the account definitions with which the user accounts are created in the central system. A user account is then created in the central system if the identity does not yet have a user account.

For an account definition to create user accounts, leave this field empty.

Description

Text field for additional explanation.

Manage level (initial)

Manage level to use by default when you add new user accounts.

If the account definition is valid for the child system of a CUA system, assign the Unmanaged manage level.

Risk index

Value for evaluating the risk of assigning the account definition to identities. Set a value in the range 0 to 1. This input field is only visible if the QER | CalculateRiskIndex configuration parameter is set.

For more information, see the One Identity Manager Risk Assessment Administration Guide.

Service item

Service item through which you can request the account definition resource in the IT Shop. Assign an existing service item or add a new one.

IT Shop

Specifies whether the account definition can be requested through the IT Shop. This account definition can be requested through the Web Portal and allocated by defined approval processes. The resource can also be assigned directly to identities and roles outside the IT Shop.

Only for use in IT Shop

Specifies whether the account definition can only be requested through the IT Shop. This account definition can be requested through the Web Portal and allocated by defined approval processes. The account definition cannot be directly assigned to roles outside the IT Shop.

Automatic assignment to identities

Specifies whether the account definition is automatically assigned to all internal identities. To automatically assign the account definition to all internal identity, use the Enable automatic assignment to identities The account definition is assigned to every identity that is not marked as external. Once a new internal identity is created, they automatically obtain this account definition.

To automatically remove the account definition assignment from all identities, use the Disable automatic assignment to identities. The account definition cannot be reassigned to identities from this point on. Existing account definition assignments remain intact.

Retain account definition if permanently disabled

Specifies the account definition assignment to permanently deactivated identities.

Option set: The account definition assignment remains in effect. The user account remains intact.

Option not set (default): The account definition assignment is not in effect. The associated user account is deleted.

Retain account definition if temporarily disabled

Specifies the account definition assignment to temporarily deactivated identities.

Option set: The account definition assignment remains in effect. The user account remains intact.

Option not set (default): The account definition assignment is not in effect. The associated user account is deleted.

Retain account definition on deferred deletion

Specifies the account definition assignment on deferred deletion of identities.

Option set: The account definition assignment remains in effect. The user account remains intact.

Option not set (default): The account definition assignment is not in effect. The associated user account is deleted.

Retain account definition on security risk

Specifies the account definition assignment to identities posing a security risk.

Option set: The account definition assignment remains in effect. The user account remains intact.

Option not set (default): The account definition assignment is not in effect. The associated user account is deleted.

Resource type

Resource type for grouping account definitions.

Spare field 01 - spare field 10

Additional company-specific information. Use the Designer to customize display names, formats, and templates for the input fields.

Groups can be inherited

Specifies whether the user account can inherit groups through the linked identity. If the option is set, the user account inherits groups through hierarchical roles, in which the identity is a member, or through IT Shop requests.

  • If you add an identity with a user account to a department, for example, and you have assigned groups to this department, the user account inherits these groups.

  • If an identity has requested group membership in the IT Shop and the request is granted approval, the identity's user account only inherits the group if the option is set.

Roles can be inherited

Specifies whether the user account can inherit SAP roles through the linked identity. If the option is set, the user account inherits the roles through hierarchical roles, in which the identity is a member, or through IT Shop requests.

Profiles can be inherited

Specifies whether the user account can inherit profiles through the linked identity. If the option is set, the user account inherits profiles through hierarchical roles, in which the identity is a member, or through IT Shop requests.

Creating manage levels

Specify the manage level for an account definition for managing user accounts. The user account’s manage level specifies the extent of the identity’s properties that are inherited by the user account. This allows an identity to have several user accounts in one target system, for example:

  • Default user account that inherits all properties from the identity.

  • Administrative user account that is associated to an identity but should not inherit the properties from the identity.

One Identity Manager supplies a default configuration for manage levels:

  • Unmanaged: User accounts with the Unmanaged manage level are linked to the identity but they do no inherit any further properties. When a new user account is added with this manage level and an identity is assigned, some of the identity's properties are transferred initially. If the identity properties are changed at a later date, the changes are not passed onto the user account.

  • Full managed: User accounts with the Full managed manage level inherit defined properties of the assigned identity. When a new user account is created with this manage level and an identity is assigned, the identity's properties are transferred in an initial state. If the identity properties are changed at a later date, the changes are passed onto the user account.

NOTE: The Full managed and Unmanaged manage levels are analyzed in templates. You can customize the supplied templates in the Designer.

You can define other manage levels depending on your requirements. You need to amend the templates to include manage level approaches.

Specify how an identity's temporary deactivation, permanent deactivation, deletion, and security risks affect its user accounts and group memberships at each manage level. For more information about manage levels, see the One Identity Manager Target System Base Module Administration Guide.

  • Identity user accounts can be locked when they are disabled, deleted, or rated as a security risk so that permissions are immediately withdrawn. If the identity is reinstated at a later date, the user accounts are also reactivated.

  • You can also define group membership inheritance. Inheritance can be discontinued if desired when, for example, the identity’s user accounts are disabled and therefore cannot be members in groups. During this time, no inheritance processes should be calculated for this identity. Existing group memberships are deleted.

IMPORTANT: The Unmanaged manage level is assigned automatically when you create an account definition and it cannot be removed.

To assign manage levels to an account definition

  1. In the Manager, select the SAP R/3 > Basic configuration data > Account definitions > Account definitions category.

  2. Select an account definition in the result list.

  3. Select the Assign manage level task.

  4. In the Add assignments pane, assign the manage level.

    TIP: In the Remove assignments pane, you can remove assigned manage levels.

    To remove an assignment

    • Select the manage level and double-click .

  5. Save the changes.

To edit a manage level

  1. In the Manager, select the SAP R/3 > Basic configuration data > Account definitions > Manage levels category.

  2. Select the manage level in the result list. Select Change main data.

    - OR -

    Click in the result list.

  3. Edit the manage level's main data.

  4. Save the changes.

Detailed information about this topic
相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级