-
标题
CMOS Battery Failure on TPAM Appliance -
说明
In the event of a motherboard battery failure the ‘system board battery’ message is lit up on the front of the console.
CMOS (complementary metal-oxide-semiconductor) is the term usually used to describe the small amount of memory on a computer motherboard that stores the BIOS settings. Some of these BIOS settings include the system time and date as well as hardware settings.
IDRAC logs may show the message:
"The system board battery is low."
"The system board battery is operating normally."
"The system board battery is low."
"The CMOS battery is low" -
解决办法
- Power off the appliance
- Unplug all the power cables and hold down the power button for 20 seconds.
- Plug the power cables back in and restart the appliance
If the message persists the battery may need to be replaced.
- Open the box
- Check the battery is seated correctly. (It is a 3 V CR2032 Lithium coin cell).
See the following article for instructions on battery replacement and seating.
http://www.dell.com/support/manuals/us/en/19/poweredge-r320/R320OwnersManual-v2/Replacing-The-System-Battery?guid=GUID-6DB359C0-7ECA-41B0-AAAB-359F03E8C29A&lang=en-us
If the problem persists after replacing the CMOS battery then the appliance may need to be RMA’d. Please refer to the following KB article for the RMA process:
https://support.quest.com/kb/74170 -
附件
-
其他信息
CMOS (complementary metal-oxide-semiconductor) is the term usually used to describe the small amount of memory on a computer motherboard that stores the BIOS settings. Some of these BIOS settings include the system time and date as well as hardware settings.
