立即与支持人员聊天
与支持团队交流

One Identity Safeguard for Privileged Passwords 2.11 - Administration Guide

Introduction System requirements Using the virtual appliance and web management console Using the cloud Setting up Safeguard for Privileged Passwords for the first time Search box Using the web client Installing the desktop client Using the desktop client Privileged access requests Toolbox Accounts Account Groups Assets Asset Groups Discovery Entitlements Partitions Settings
Access Request settings Appliance settings Asset Management settings Backup and Retention settings Certificate settings Cluster settings External Integration settings Messaging settings Profile settings Safeguard Access settings Sessions settings
Users User Groups Disaster recovery and clusters Administrator permissions Preparing systems for management Troubleshooting Frequently asked questions Appendix A: Safeguard ports Appendix B: SPP 2.7 or later migration guidance Appendix C: SPP and SPS join guidance Appendix D: Regular Expressions Appendix E: Historical changes by release Glossary

Directory Account

You can configure Safeguard for Privileged Passwords to authenticate to a managed system using an account from an external identity store such as Microsoft Active Directory. In order to use this authentication type, you must first add a directory asset to Safeguard for Privileged Passwords and add domain user accounts. For more information, see Accounts.

Table 51: Directory Account authentication type properties
Property Description
Service Account Name

Click Select Account. Choose the service account name used for management tasks. The accounts available for selection are domain user accounts that are linked to a directory that was previously added to Safeguard for Privileged Passwords.

Service Account Password

If required, enter the password used to authenticate.

Privilege Elevation Command

If required, enter a privilege elevation command (such as sudo). This is used as a prefix for commands that require privileged access on the system and to manage accounts on Unix-based systems; that is, to check and change passwords and to discover accounts.

When adding an asset, Safeguard for Privileged Passwords uses this command to perform Test Connection. For more information, see About Test Connection.

To enable Safeguard for Privileged Passwords to elevate the privileges of the service account, assign the asset to the scope of a partition profile that has the privilege elevation command defined. For more information, see Creating a partition profile.

The privilege elevation command must run non-interactively, that is, without prompting for a password. For more information, see Preparing Unix-based systems.

Limit: 255 characters

Test Connection

Click this button to verify that Safeguard for Privileged Passwords can log in to this asset using the service account credentials you have provided. For more information, see About Test Connection.

Service Account Profile

  • Click Edit to add the profile or Remove to delete the assigned profile. Available profiles are based on the partition selected on the General tab (asset discovery). To update the profile later, go to the service account and update the Profile. For more information, see General tab (account).
  • Use Named Pipe for service account connection

    Select to use the Named Pipe when connecting to the asset. Clear this check box to use TCP/IP when connecting to the asset.

    Use SSL Encryption

    Select this option to enable Safeguard to encrypt communication with this asset. If you do not select this option for a MicrosoftSQL Server that is configured to force encryption, Test Connection will use untrusted encryption and succeed with valid credentials. For more information about how Safeguard database servers use SSL, see How do Safeguard for Privileged Passwords database servers use SSL.

    Verify SSL Certificate

    Use this option to enable or disable SSL Certificate verification on the asset. When enabled, Safeguard for Privileged Passwords compares the signing authority of the certificate presented by the asset to the certificates in the Trusted Certificates store every time Safeguard for Privileged Passwords connects to the asset. Trust must be established for Safeguard for Privileged Passwords to manage the asset. For Safeguard for Privileged Passwords to verify an SSL certificate, you must add the asset's signing authority certificate to the Trusted Certificates store. Only clear the Verify SSL Certificate option if you do not want to establish trust with the asset’s

    Privilege Level Password If required, enter the system enable password to allow access to the Cisco configuration.
    Auto Accept SSH Host Key

    Select this option to have Safeguard for Privileged Passwords automatically accept an SSH host key. When an asset requiring an SSH host key does not have one, Check Password will fail. For more information, see Connectivity failures.

    Instance

    Specify the Instance name if you have configured multiple instances of a SQL Server on this asset. If you have configured a default (unnamed) instance of the SQL Server on the host, you need to provide the IP address and port number.

    Port

    Enter the port number to log in to the asset. This option is not available for all operating systems.

    Connection Timeout

    Enter the directory connection timeout period. Default: 20 seconds.

    Local System Account

    You can configure Safeguard for Privileged Passwords to authenticate to a managed SQL Server using a local system account and password. The local system account is a Windows user account on the server that is hosting the SQL database.

    NOTE: In order to use this authentication type, you must add both a Windows asset and a SQL Server asset to Safeguard for Privileged Passwords.

    Table 52: Local System Account authentication type properties
    Property Description
    Service Account

    Click Select Account to choose the local system account associated with the SQL Server for Safeguard for Privileged Passwords to use for management tasks.

    Test Connection

    Click this button to verify that Safeguard for Privileged Passwords can log in to this asset using the local system account credentials you have provided. For more information, see About Test Connection.

    Use Named Pipe for service account connection

    Select to use the Named Pipe when connecting to the asset. Clear this check box to use TCP/IP when connecting to the asset.

    Advanced

    Open to reveal the following settings:

    As Privilege

    Specify the Oracle privilege level to use when connecting with the selected Oracle service account, if required. The Oracle SYS account requires the privilege level SYSDBA or SYSOPER. For details, see the Oracle document, About Administrative Accounts and Privileges and SYSDBA and SYSOPER System Privileges.

    Instance (Service Name)

    Specify the Instance name if you have configured multiple instances of a SQL Server on this asset. If you have configured a default (unnamed) instance of the SQL Server on the host, you need to provide the IP address and port number.

    Specify the Service Name if you are configuring an Oracle asset.

    Port

    Enter the port number to log in to the asset.

    Connection Timeout

    Enter the SQL server connection timeout period.

    Default: 20 seconds

    Password (local service account)

    You can configure Safeguard for Privileged Passwords to authenticate to a managed system using a local service account and password.

    Note: Some options are not available for all operating systems.

    Table 53: Password authentication type properties
    Property Description
    Distinguished Name

    For LDAP platforms, enter the fully qualified distinguished name (FQDN) for the service account.

    For example: cn=dev-sa,ou=people,dc=example,dc=com

    Service Account Name

    Browse to select the service account for Safeguard for Privileged Passwords to use for management tasks. When you add the asset, Safeguard for Privileged Passwords automatically adds the service account to Accounts. For more information, see About service accounts.

    Required except for LDAP platforms, which use the Distinguished Name.

    Service Account Password

    Enter the service account password used to authenticate to this asset.

    Limit: 255 character

    Privilege Elevation Command

    If required, enter a privilege elevation command (such as sudo). This is used as a prefix for commands that require privileged access on the system and to manage accounts on Unix-based systems; that is, to check and change passwords and to discover accounts.

    When adding an asset, Safeguard for Privileged Passwords uses this command to perform Test Connection. For more information, see About Test Connection.

    To enable Safeguard for Privileged Passwords to elevate the privileges of the service account, assign the asset to the scope of a partition profile that has the privilege elevation command defined. For more information, see Creating a partition profile.

    The privilege elevation command must run non-interactively, that is, without prompting for a password. For more information, see Preparing Unix-based systems.

    Limit: 255 characters

    Privilege Level Password

    Enter the Enable password to allow access to the Cisco configuration.

    Test Connection

    Click this button to verify that Safeguard for Privileged Passwords can log in to this asset using the service account credentials you have provided. For more information, see About Test Connection.

    Service Account Profile

    Click Edit to add the profile or Remove to delete the assigned profile. Available profiles are based on the partition selected on the General tab (asset discovery). To update the profile later, go to the service account and update the Profile. For more information, see General tab (account).

    Auto Accept SSH Host Key

    This check box is selected by default indicating that Safeguard for Privileged Passwords automatically accepts an SSH host key. This option is not available for all platforms.

    Once the SSH host key is discovered, the SSH host key fingerprint is displayed.

    When an asset requiring an SSH host key does not have one, Check Password will fail. For more information, see Connectivity failures.

    Use SSL Encryption

    Select this option to enable Safeguard to encrypt communication with this asset. If you do not select this option for a MicrosoftSQL Server that is configured to force encryption, Test Connection will use untrusted encryption and succeed with valid credentials. For more information about how Safeguard database servers use SSL, see How do Safeguard for Privileged Passwords database servers use SSL

    Verify SSL Certificate

    Use this option to enable or disable SSL Certificate verification on the asset. When enabled, Safeguard for Privileged Passwords compares the signing authority of the certificate presented by the asset to the certificates in the Trusted Certificates store every time Safeguard for Privileged Passwords connects to the asset. Trust must be established for Safeguard for Privileged Passwords to manage the asset. For Safeguard for Privileged Passwords to verify an SSL certificate, you must add the asset's signing authority certificate to the Trusted Certificates store. Only clear the Verify SSL Certificate option if you do not want to establish trust with the asset’s

    As Privilege

    Specify the Oracle privilege level to use when connecting with the selected Oracle service account, if required. The Oracle SYS account requires the privilege level SYSDBA or SYSOPER. For details, see the Oracle document, About Administrative Accounts and Privileges and SYSDBA and SYSOPER System Privileges.

    Instance (Service Name)

    Specify the Instance name if you have configured multiple instances of a SQL Server on this asset. If you have configured a default (unnamed) instance of the SQL Server on the host, you need to provide the IP address and port number.

    Specify the Service Name if you are configuring an Oracle asset.

    Workstation ID

    Specify the configured workstation ID, if applicable. This option is for IBM i systems.

    Port

    Enter the port number on which the asset will be listening for connections.

    Default: port 22; port 1433 for SQL server; port 8443 for SonicWALL SMA or CMS appliance.

    Connection Timeout

    Enter the connection timeout period.

    Default: 20 seconds

    Access Key

    You can configure Safeguard for Privileged Passwords to authenticate to a managed system using an access key.

    Table 54: Access Key authentication type properties
    Property Description
    Service Account

    Enter an account for Safeguard for Privileged Passwords to use for management tasks. For more information, see About service accounts.

    Access Key ID

    Enter the unique identifier that is associated with the secret key. The access key ID and secret key are used together to sign programmatic AWS requests cryptographically.

    Limit: 32 alphanumeric characters

    Secret Key

    Enter a secret access key used to cryptographically sign programmatic Amazon Web Services (AWS) requests.

    Limit: 40 alphanumeric characters; the + and the / characters are also allowed.

    Test Connection

    Click this button to verify that Safeguard for Privileged Passwords can log in to this asset using the service account credentials you have provided. For more information, see About Test Connection.

    Port

    Enter the port number to log in to the asset.

    Connection Timeout

    Enter the connection timeout period.

    Default: 20 seconds

    相关文档