立即与支持人员聊天
与支持团队交流

Active Roles 8.0 LTS - Administration Guide

Introduction About Active Roles Getting Started Rule-based Administrative Views Role-based Administration
Access Templates as administrative roles Access Template management tasks Examples of use Deployment considerations Windows claims-based Access Rules
Rule-based AutoProvisioning and Deprovisioning
About Policy Objects Policy Object management tasks Policy configuration tasks
Property Generation and Validation User Logon Name Generation Group Membership AutoProvisioning E-mail Alias Generation Exchange Mailbox AutoProvisioning AutoProvisioning for SaaS products OneDrive Provisioning Home Folder AutoProvisioning Script Execution Office 365 and Azure Tenant Selection User Account Deprovisioning Office 365 Licenses Retention Group Membership Removal Exchange Mailbox Deprovisioning Home Folder Deprovisioning User Account Relocation User Account Permanent Deletion Group Object Deprovisioning Group Object Relocation Group Object Permanent Deletion Notification Distribution Report Distribution
Deployment considerations Checking for policy compliance Deprovisioning users or groups Restoring deprovisioned users or groups Container Deletion Prevention policy Picture management rules Policy extensions
Workflows
Understanding workflow Workflow activities overview Configuring a workflow
Creating a workflow definition Configuring workflow start conditions Configuring workflow parameters Adding activities to a workflow Configuring an Approval activity Configuring a Notification activity Configuring a Script activity Configuring an If-Else activity Configuring a Stop/Break activity Configuring an Add Report Section activity Configuring a Search activity Configuring CRUD activities Configuring a Save Object Properties activity Configuring a Modify Requested Changes activity Enabling or disabling an activity Enabling or disabling a workflow Using the initialization script
Example: Approval workflow E-mail based approval Automation workflow Activity extensions
Temporal Group Memberships Group Family Dynamic Groups Active Roles Reporting Management History
Understanding Management History Management History configuration Viewing change history
Workflow activity report sections Policy report items Active Roles internal policy report items
Examining user activity
Entitlement Profile Recycle Bin AD LDS Data Management One Identity Starling Management Managing One Identity Starling Connect Configuring linked mailboxes with Exchange Resource Forest Management Configuring remote mailboxes for on-premises users Azure AD, Office 365, and Exchange Online management
Configuring Active Roles to manage hybrid AD objects Managing Hybrid AD Users Unified provisioning policy for Azure O365 Tenant Selection, Office 365 License Selection, and Office 365 Roles Selection, and OneDrive provisioning Office 365 roles management for hybrid environment users Managing Office 365 Contacts Managing Hybrid AD Groups Managing Microsoft 365 Groups Managing Azure Security Groups Managing cloud-only distribution groups Managing cloud-only Azure users Managing cloud-only Azure guest users Managing cloud-only Azure contacts Changes to Active Roles policies for cloud-only Azure objects Managing room mailboxes Managing cloud-only shared mailboxes
Managing Configuration of Active Roles
Connecting to the Administration Service Adding and removing managed domains Using unmanaged domains Evaluating product usage Creating and using virtual attributes Examining client sessions Monitoring performance Customizing the console Using Configuration Center Changing the Active Roles Admin account Enabling or disabling diagnostic logs Active Roles Log Viewer
SQL Server Replication Appendix A: Using regular expressions Appendix B: Administrative Template Appendix C: Communication ports Appendix D: Active Roles and supported Azure environments Appendix E: Active Roles integration with other One Identity and Quest products Appendix F: Active Roles integration with Duo Appendix G: Active Roles integration with Okta Active Roles Language Pack

Configuring an If-Else activity

An If-Else activity is a composite activity. It is composed of several branches, each of which has individual conditions specified. An If-Else branch may contain any number of other activities. Every operation that satisfies the conditions specified on a given branch causes Active Roles to run the activities included in that branch. Only one branch of a single If-Else activity can be run even though an operation may satisfy the conditions on more than one branch.

Typically, an If-Else activity has two branches, with certain conditions specified on the first (leftmost) branch. The second branch has no conditions specified on it, so as to act as the Else branch. If an operation satisfies the conditions, the activities included in the first branch are run; otherwise, the operation flows through the activities found in the second branch.

Configuring an If-Else activity involves the following tasks:

To add a branch to an If-Else activity

  1. In the Active Roles console tree, expand Configuration | Policies | Workflow, and select the workflow containing the If-Else activity you want to configure.

    This opens the Workflow Designer window in the details pane, representing the workflow definition as a process diagram.

  1. In the process diagram, right-click the name of the If-Else activity and click Add Branch.

This adds a branch with the default name of If-Else Branch. Right-click the name of the branch and click Properties to change the name as necessary. You can delete a branch by clicking the name of the branch and then clicking Delete.

To add an activity to an If-Else branch

  • Drag the activity from the left panel onto the branch.

If you add an activity to the upper part of the diagram (above the Operation execution line), the activity will be run in the pre-execution phase of operation processing (see Workflow processing overview earlier in this chapter).

If you add an activity to the lower part of the diagram (beneath the Operation execution line), the activity will be run in the post-execution phase of operation processing. Certain activities, such as an Approval activity, which are intended to run in the pre-execution phase, cannot be added to the lower part of the diagram.

You can delete an activity from a branch by clicking the name of the activity and then clicking Delete.

The following topic provides instructions on how to configure conditions for an If-Else branch: Configuring conditions for an If-Else branch.

Steps to configure error handling

When configuring an If-Else activity, you can configure error handling to suppress errors encountered by that If-Else activity and all activities included in that If-Else activity.

To configure error handling for an If-Else activity

  1. In the process diagram, right-click the name of the If-Else activity and click Properties.
  2. Go to the Error handling tab in the If-Else Activity Properties dialog box, and select or clear the Continue workflow even if this activity encounters an error check box on that tab.

If the Continue workflow even if this activity encounters an error check box is not selected (default setting), then an error condition encountered by the activity causes Active Roles to terminate the workflow. If you select this check box, the workflow continues regardless of whether or not the If-Else activity or any activity within the If-Else activity encounters an error condition.

Configuring conditions for an If-Else branch

An If-Else activity is intended to select exactly one branch of the activity from a given set of branches. For each branch, the activity checks the branch conditions and executes the first of the branches whose condition evaluates to TRUE.

The workflow designer provides a condition builder for configuring branch conditions, located in the If-Else Branch Activity Properties dialog box.

To access the condition builder for an If-Else branch

  1. Right-click the name of the branch and click Properties.
  2. Go to the Conditions box in the If-Else Branch Activity Properties dialog box that opens.

When you configure an If-Else branch, you need to add at least one condition. By default, a single, implied condition group is created when you add a branch condition. You can create additional condition groups to group a set of conditions and nest grouped conditions within other condition groups.

A condition group contains one or more conditions connected by the same logical operator. By grouping conditions, you specify that those conditions should be evaluated as a single unit. The effect is the same as if you put parentheses around an expression in a mathematical equation or logic statement.

To add a condition to a condition group

  • In the Conditions box, click the name of the condition group and then click Insert condition.

Click the plus sign (+) next to the name of the condition group.

You can remove a condition, if needed, by clicking the Delete condition button labeled X on the right side of the list item representing the condition in the Conditions box.

To add a condition group into another condition group

  • In the Conditions box, click the name of the condition group, point to Insert condition group, and then click an option to specify the logical operator:
    • AND group.  The condition group evaluates to TRUE if all conditions in the group are TRUE.
    • OR group.  The condition group evaluates to TRUE if any condition in the group is TRUE.
    • NOT AND group.  The condition group evaluates to TRUE if any condition in the group evaluates to FALSE.
    • NOT OR group.  The condition group evaluates to TRUE if all conditions in the group evaluate to FALSE.

By default, AND is the logical operator between the conditions in a condition group. It is possible to change the logical operator by converting the condition group to a different group type: Click the name of the group, point to Convert condition group to, and then click the option appropriate to the desired logical operator.

You can remove an entire condition group, if needed, by clicking the name of the group and then clicking Delete condition group.

Once you have added a condition to a condition group, you can use the following steps to configure the condition.

To configure a condition

  1. Click Configure condition to evaluate, and then choose from the following options to specify the entity or field you want the condition to evaluate:
    • Property of workflow target object.  Evaluate the value of a certain property of the target object of the request that started the workflow. The condition builder prompts you to choose the desired property. This option is unavailable in case of automation workflow.
    • Property of workflow initiator.  Evaluate the value of a certain property of the user whose request started the workflow. The condition builder prompts you to choose the desired property.
    • Changed value of workflow target object property.  Evaluate the value that is requested to be assigned to a certain property of the workflow target object, which represents the requested change to the property of the target object of the request that started the workflow. The condition builder prompts you to choose the desired property. This option is unavailable in case of automation workflow.
    • Activity execution status.  Evaluate whether or not Active Roles encountered an error when executing a certain activity. The condition builder prompts you to select the desired activity. Note that this option requires the activity configuration to allow the workflow to continue even if the activity encounters an error.
    • Approver action choice.  Evaluate the name of the action button applied by the approver to complete the approval task created by a certain Approval activity. Use this option to determine which action button the approver applied to allow the operation that was subject to approval. The condition builder prompts you to select the desired Approval activity. This option is unavailable in case of automation workflow.
    • Workflow parameter value.  Evaluate the value of a certain parameter of the workflow. The condition builder prompts you to select the desired parameter from the workflow definition.
    • Property of object from workflow data context.  Evaluate the value of a certain property of the object that will be selected by the If-Else activity on the basis of the data found in the workflow environment at the time of executing the workflow. The condition builder prompts you to choose the desired property and specify which object you want the activity to select upon evaluating the condition at workflow run time.
    • Value generated by rule expression.  Evaluate the string value of a certain rule expression. The condition builder prompts you to configure a rule expression. By using a rule expression you can compose a string value based on properties of various objects found in the workflow environment at the time of executing the workflow. Active Roles calculates the value of your rule expression upon evaluating the condition at workflow run time.
  2. Click the current comparison operator, if needed, and then click the operator you want the condition to use.
  3. Click Define value to compare to, and then choose an option to specify the desired comparison value.

The list of options that are available to specify a comparison value depends upon the entity or field you have configured the condition to evaluate. The following table summarizes the comparison value options.

Table 59: Comparision value options

Condition to evaluate

Comparison value options

Property of workflow target object

- OR -

Property of workflow initiator

- OR -

Changed value of workflow target object property

- OR -

Workflow parameter value

- OR -

Property of object from workflow data context

- OR -

Value generated by rule expression
  • Text string
  • Property of workflow target object
  • Property of workflow initiator
  • Changed value of workflow target object property
  • Workflow parameter value
  • Property of object from workflow data context
  • Value generated by rule expression

Activity execution status
  • Not executed
  • Completed successfully
  • Encountered an error

Approver action choice
  • The name of an action button
  • Value generated by script

For a brief description of comparison operators and comparison value options, see Search filter.

Configuring a script-based condition

To configure a script-based condition, you need to create and apply a script module containing a function that analyzes the requested operation to determine whether to run the branch. The function could use the Active Roles ADSI Provider to access properties of objects involved in the operation, analyze the properties, and return TRUE or FALSE depending on the result of the analysis. The branch runs if the function returns TRUE.

To apply a script-based condition

  1. Right-click the name of the branch and click Properties.
  2. In the If-Else Branch Activity Properties dialog box, under Conditions, do the following:
    1. Click the title of the condition group and then click Insert condition.
    2. Click Configure condition to evaluate and then click Value generated by rule expression.
  3. In the Configure Rule Expression dialog box, click Add entry and then click Value generated by script.
  4. Use the Configure Entry dialog box to select the appropriate script module and script function.
  5. Click OK to close the Configure Entry dialog box.
  6. Click OK to close the Configure Rule Expression dialog box.
  7. In the If-Else Branch Activity Properties dialog box, under Conditions, do the following:
    1. Verify that comparison operator equals is selected.
    2. click Define value to compare to, and then click Text string.
  8. In the Configure Entry dialog box, under Text string, type TRUE.
  9. Click OK to close the Configure Entry dialog box.
  10. Click OK to close the If-Else Branch Activity Properties dialog box.
  11. Save your changes to the workflow definition.

As a result of these steps, the If-Else branch you have configured will be selected if the function specified in Step 4 returns TRUE at workflow run time. For more information and instructions, see “Developing Script Condition Functions” in the Active Roles SDK documentation.

相关文档

The document was helpful.

选择评级

I easily found the information I needed.

选择评级